|
|
Special Equipment
1.
- one immersion system, split up in 2 separate basins:
solvent and dye
- two independently of each other working lifting mechanisms
- Stacking device in frame construction with perforate plate
- Immerse material moves down in a horizontal position to the bottom of the basin
(Click for Zoom)
2.
- Immersion systems in conventional design: lifting mechanism drops into the basin in an horizontal position
- Stacking device with closely spaced fork spacing: short lengths
- Hold-down device with perforate plate to avoid
the floating away of bits and pieces
- Basin A for impregnation, basin B with dye
(Click for Zoom)
3.
- Immersion system in inclined position
to dye sight protection elements 1.80 x 1.80 m
- Immersion system with safety tank
are embedded in a concrete basin
(Click for Zoom)
4.
- Immersion system to colour milled and
glued multilayer plates 3.00 x 2.00 m
- Stacking device and hold-down device
with zinc plated gratings
(Click for Zoom)
5.
- Immersion system in inclined position of 19.50 m length
- Concept for 20 manufactured boxes
for vegetables - stacking device and
hold-down device with perforate plate
- Mobile roof protects against dirt / dust
(Click for Zoom)
6.
- two immersion systems contain oily liquid for chains,
fork construction with additional gratings
- Mobile roof with revolving strip curtain (explosion hazard)
- Immersion system with ram protection
(Click for Zoom)
7. Steel Tube Equipment
- Immersion system of stainless steel with special diving basket for pipes, isolated safety tank made of steel
(Click for Zoom)
- Between both basins runs hot water-glycol mixture
to make sure to keep the right temperature of
the fluid inside the stainless steel basin
(Click for Zoom)
- Circulating arrangement with cleaning filter
- Footbridge on both sides to take down the pendant
- Separate safety tank, covered by gratings, storage box
(Click for Zoom)
8. Phosphate Tank 
- Double-walled immersion system made of stainless steel
- Isolation on the outsides of the machinery
is furthermore protected by stainless plates
(Click for Zoom)
- Spaces filled with water-glycol mixture which is heated with steam by steam procedures and heat exchanger
- Machinery is integrated in the whole production process and is fitted by indoor crane
(Click for Zoom)
9. Machinery for warming up pine-wood as a preliminary stage for the detreader 
- Immersion system to warm the pine-wood up
(square-shaped timber) with subsequent
de-stacking and stepped feed to the detreader
(Click for Zoom)
|
TÜV-Certificate
Contact
REU Matthias Hubel GmbH
Unteres Glöckle 10
86720 Nördlingen
Germany
Tel.: +49 90 81-86-300
Fax.: +49 90 81-86-325
E-Mail: reu@reu-hubel.de
Sprache | Language
|
